ID old gulf coast boat and ideas on refurb
Posted: Thu Sep 14, 2023 2:15 pm
I picked up this boat near the marsh in south Louisiana.
Does anyone have an idea who or when it was made.
it’s a flat bottom with a semi v bow.
[img]blob:88847f49-8ad6-4c63-8db2-5e2c77dffe6e[/img]
[img]blob:311ce762-c242-4b13-90b3-85014b2cbc90[/img]
I gutted the hull and now have a nice canvas to work with.
Any suggestions appreciated.
The boat is all 3/16 thick except the Dimond plate is 1/8
The boat is 19’ long and 8’ Beam
weight is 1,400 lbs
[img]blob:1c9840fd-30b8-4778-864e-6be48f76ab1e[/img]
I feel like I need to sand blast the whole boat. Every place that had a connection has a decent amount of corrosion. Lots of holes to fill.
Anyone use the Vulcan 220 tig welder? What filler rod?
[img]blob:cb62f9b1-e092-42c1-80c1-5c7342a6522e[/img]
Does anyone have an idea who or when it was made.
it’s a flat bottom with a semi v bow.
[img]blob:88847f49-8ad6-4c63-8db2-5e2c77dffe6e[/img]
[img]blob:311ce762-c242-4b13-90b3-85014b2cbc90[/img]
I gutted the hull and now have a nice canvas to work with.
Any suggestions appreciated.
The boat is all 3/16 thick except the Dimond plate is 1/8
The boat is 19’ long and 8’ Beam
weight is 1,400 lbs
[img]blob:1c9840fd-30b8-4778-864e-6be48f76ab1e[/img]
I feel like I need to sand blast the whole boat. Every place that had a connection has a decent amount of corrosion. Lots of holes to fill.
Anyone use the Vulcan 220 tig welder? What filler rod?
[img]blob:cb62f9b1-e092-42c1-80c1-5c7342a6522e[/img]