Corrosion resistance products
Posted: Sun Jun 21, 2020 3:27 am
Hi all, been working ( well researching) on what path to take in the boat remodel I am working on ( well I have a guy doing the work) . I have the fuel tank out, acid washed the inside hull, burred out the pitting and tig filled them up. And now need to decided on if I should spray the inside hull / bilge with a coating, before we install the 2 new fuel tanks.
Anyways doing all this research and came across this comparison /study.
https://corrosion-doctors.org/Inhibitor ... -Spray.htm
It seems to mention all the ones that keep popping up here like boeshield t9, atf50 etc.
Other improvements I am doing to make the hull less prone to corrosion is adding bilge fans and ventilation as the prior design had zero air circulation. Also considering putting in a small anode (aluminum) in the inside of the wet area of the bilge to a frame member.
Anyways doing all this research and came across this comparison /study.
https://corrosion-doctors.org/Inhibitor ... -Spray.htm
It seems to mention all the ones that keep popping up here like boeshield t9, atf50 etc.
Other improvements I am doing to make the hull less prone to corrosion is adding bilge fans and ventilation as the prior design had zero air circulation. Also considering putting in a small anode (aluminum) in the inside of the wet area of the bilge to a frame member.