Pacific 2175?
Pacific 2175?
Pacific has a picture of the new 2175 on their website, http://www.pacificskiffs.com/recent/recent.php
Looks great, is this the 23' without the bracket?
Looks great, is this the 23' without the bracket?
'05 Pacific 1925
Mercury 150
Mercury 150
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Pacific 2175?
Lost the bracket and Transom is done different. Rest of the boat is the same as the 2325.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
-
- Posts: 509
- Joined: Thu Oct 06, 2011 9:20 am
- 12
- Your location: Middle Georgia
Re: Pacific 2175?
Being an inland person, I hardly ever get tired of admiring the vessels posted up. One Day....
I only do what the voices in the Tackle Box tell me to.
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: Pacific 2175?
I posted here about it too...
Possibly a way of making a 23 cheaper. Cuz, it sure looks like the loss of some "workin" room to me.
Possibly a way of making a 23 cheaper. Cuz, it sure looks like the loss of some "workin" room to me.
Re: Pacific 2175?
I doubt the reason is to make it cheaper, probably just some people prefer the different transom.JETTYWOLF wrote:I posted here about it too...
Possibly a way of making a 23 cheaper. Cuz, it sure looks like the loss of some "workin" room to me.
'05 Pacific 1925
Mercury 150
Mercury 150
Re: Pacific 2175?
I have the 2175 sitting out behind the house. The reason I decided to buy the boat without a transom bracket was to have the ability to fight the fish around the motors without reaching out so far with a short rod like when a hot dorado is making mischief around the back of your boat. Also when fishing salmon using down riggers, the lines are less apt to get stuck on the motors and bracket during a sharp turn.
There is plenty of working room to fight a fish 360 degrees around the boat. Also, it is easier to trailer the 21ft than the 23ft. I love my new boat!!! Works good
There is plenty of working room to fight a fish 360 degrees around the boat. Also, it is easier to trailer the 21ft than the 23ft. I love my new boat!!! Works good
Re: Pacific 2175?
O.K. Here is a aluminum boat center fold... the NEW 2175!!! More photos to come.
- Attachments
-
- P1010247.jpg (60.89 KiB) Viewed 9196 times
Re: Pacific 2175?
Here are a couple more driveway shots or the 2175 Pacific Skiff. Action shots will be added as soon as we can get out on the water again.
- Attachments
-
- P1010226.jpg (98.42 KiB) Viewed 9195 times
-
- P1010230.jpg (66.86 KiB) Viewed 9195 times
Re: Pacific 2175?
One more shot for the Pacific Skiff fans out there.
- Attachments
-
- P1010007.jpg (63.22 KiB) Viewed 9194 times
Re: Pacific 2175?
I think they told me at the factory that you loose something like eight or ten inches of interior space at the transom with the 2175 but the placement of the rear seat makes it perfect to face the rear of the boat and keep your eyes on the fishing rods. This makes your guests happy to be with easy striking distance of the rods if you are trolling. When jigging, four of us were able to line up along the rail on one side without the boat even beginning to lean over.
Re: Pacific 2175?
Great pictures, boat looks great!!
What kind of performance are you seeing with the 225? How many people and what Max HP is the boat rated for?
What kind of performance are you seeing with the 225? How many people and what Max HP is the boat rated for?
'05 Pacific 1925
Mercury 150
Mercury 150
Re: Pacific 2175?
The Honda 225 works great. You would never need more power than that. The boat gets up on plane in seconds and glides along at a good clip effortlessly at 3500 RPM. Unfortunately there are no ratings from the manufacturer at this time. This was the first of the 2175 series. With four people, 3/4 tank of fuel, and a moderate day of fishing, the boat burned much less fuel than I expected. It runs quite well in the rough stuff too. We got caught in the Johnstone straight with 30 knot winds and a flooding tide which was the formula for hazardous conditions. We chugged right through that washing machine and our path never varied. It certainly bred confidence in the craft.
-
- Donator #1 '08, '09, '10, '11, '12, '13
- Posts: 1077
- Joined: Thu Mar 06, 2008 10:43 pm
- 16
- Location: LA/Western NY
Re: Pacific 2175?
I have the first ever of that style, I believe. 2003 2325 with custom transom. Perfect on the drift, and does handle better (if you can believe it) around the docks than it does with the bracket...and I have docked both. If I ever had the money to build a larger Pacific weekender, I would build the transom exactly the same way!
That is a great boat! You will love it forever!
Here are a few pics on the first thread about my boat: viewtopic.php?f=6&t=442
That is a great boat! You will love it forever!
Here are a few pics on the first thread about my boat: viewtopic.php?f=6&t=442
"Once in a while you get shown the light in the strangest of places if you look at it right."
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: Pacific 2175?
SO SHINEY.....(almost looks like Welders boat 7 years later... )
Yep, those were the days. Looks like you too could have used "side bumper rails". I wish I had them, or the money to get them done.
There had to be a reason for Pacific to offer this boat nowadays. I'd think less fab work, less material WOULD save costs...even if NOT passed on to customer.
Were are you at, Mexico or something???
Yep, those were the days. Looks like you too could have used "side bumper rails". I wish I had them, or the money to get them done.
There had to be a reason for Pacific to offer this boat nowadays. I'd think less fab work, less material WOULD save costs...even if NOT passed on to customer.
Were are you at, Mexico or something???