AluminumAlloyBoats.com

Sculpin wrote:Here is a good thread on a nice 23 Super Sport Offshore Pilothouse model from the Sports Fishing BC forum.

http://www.sportfishingbc.com/forum/sho ... Build-quot

Hope you don't mind me hijacking your thread Grant. Is this one one of the ones you have been posting above?

Awesome boats

Cheers,
John

Hey Sculpin,

sorry for the delayed response. As you all know i was off hunting a couple weeks ago then i was summoned for jury duty and have been serving as a juror in a criminal case for the last week. Anyways im done now, whew.

Yes, the link to the build on the other posting is one of the boats i have been showing on here. It is the 23' SS Offshore Pilothouse which is heading to northern BC.

Here is another photo it in the rigging area.

Grant

Here is another photo of the 23' thats heading to Northern BC

Well this 23' is finally done and we took it out on the water last week. It then headed out the door heading to northern BC last thursday. What a boat! Handled well, sat nice in the water and was super efficent also.

Grant

Grant, what did you get out of the Honda 250 or do we have to wait for break in?

W, hopefully not a "hole spewing water"..... . Been there done that.

Hope they're doing a way better paint job on those 250's than on the 225's.
Mine looks like its 20 years old, and its 6 and change.

welder wrote:Grant, what did you get out of the Honda 250 or do we have to wait for break in?

Welder, you could tell this boat really has some power behind it. The Honda 250hp sure is impressive.

Also to answer Jerrywolf's question, yes Honda has a new paint process on their motors. The color has changed just slightly. It would be hard to notice unless you had the motors side by side in the correct light.

Grant

Here is another photo of the 24' SS Offshore Pilothouse in the rigging area. The boat behind it is the 26' boat that is heading to the east coast.

Here is another pictures of the 24' SS Offshore. It is almost done. This boat will be shown at the Portland boat show and possibly the Puyallup Sportsmans show if you are in the area and would like to see it.

This is another view of the 24'. This is looking at the rear station in the fishing deck. This is some more Pilothouse boats that are currently in the fabrication stages. A 26, 24, and 30' in the background

Here is a picture from above the rigging area showing a 20' Sport offshore Pilot. The boats in the backgroud are a 23' SS Drifter inboard jet boat with a 6.2 liter supercharged, aluminum block V8 w/ Hamilton 212 jet and the other is a very custom Sport offshore with cabin. Let me know if anyone wants to see more pictures of either of these.

Grant

GrantWooldridge wrote:Here is a picture from above the rigging area showing a 20' Sport offshore Pilot. The boats in the backgroud are a 23' SS Drifter inboard jet boat with a 6.2 liter supercharged, aluminum block V8 w/ Hamilton 212 jet and the other is a very custom Sport offshore with cabin. Let me know if anyone wants to see more pictures of either of these.

Grant

2012.12.12 011 wl.jpg

Interesting in a good way! What's the deadrise on the it with the jet?

What is the bow entry on this boat, and what is the deadrise aft?

DMan wrote:

GrantWooldridge wrote:Here is a picture from above the rigging area showing a 20' Sport offshore Pilot. The boats in the backgroud are a 23' SS Drifter inboard jet boat with a 6.2 liter supercharged, aluminum block V8 w/ Hamilton 212 jet and the other is a very custom Sport offshore with cabin. Let me know if anyone wants to see more pictures of either of these.

Grant

2012.12.12 011 wl.jpg

Interesting in a good way! What's the deadrise on the it with the jet?

DMan, the 23' SS Drifter is a jet boat that is heading to Idaho. This boat with an inboard jet has a deadrise of 12 degree at the transom and 18 degree at the bow.

Its gonna be a kick to drive!!

Grant

GrantWooldridge wrote:

DMan wrote:

GrantWooldridge wrote:Here is a picture from above the rigging area showing a 20' Sport offshore Pilot. The boats in the backgroud are a 23' SS Drifter inboard jet boat with a 6.2 liter supercharged, aluminum block V8 w/ Hamilton 212 jet and the other is a very custom Sport offshore with cabin. Let me know if anyone wants to see more pictures of either of these.

Grant

2012.12.12 011 wl.jpg

Interesting in a good way! What's the deadrise on the it with the jet?

DMan, the 23' SS Drifter is a jet boat that is heading to Idaho. This boat with an inboard jet has a deadrise of 12 degree at the transom and 18 degree at the bow.

Its gonna be a kick to drive!!

Grant

Awesome! Make sure you get some video of that thing running for us! :-)

DMan wrote:

GrantWooldridge wrote:

DMan wrote:

GrantWooldridge wrote:Here is a picture from above the rigging area showing a 20' Sport offshore Pilot. The boats in the backgroud are a 23' SS Drifter inboard jet boat with a 6.2 liter supercharged, aluminum block V8 w/ Hamilton 212 jet and the other is a very custom Sport offshore with cabin. Let me know if anyone wants to see more pictures of either of these.

Grant

2012.12.12 011 wl.jpg

Interesting in a good way! What's the deadrise on the it with the jet?

DMan, the 23' SS Drifter is a jet boat that is heading to Idaho. This boat with an inboard jet has a deadrise of 12 degree at the transom and 18 degree at the bow.

Its gonna be a kick to drive!!

Grant

Awesome! Make sure you get some video of that thing running for us! :-)

DMan, already planing on it. Will keep you posted!! :)

Grant

Here is a photo i just took. Fabrication is complete on one of the 24' SS Offshore Pilohouse boats we have been working on. it will next get all cleaned up and preped for paint.

Ooooooohhhhhh I like shiny How about some deck and interior pictures. Please

mojomizer wrote:Ooooooohhhhhh I like shiny How about some deck and interior pictures. Please

I'll get you some interior pictures of that 24' but in the mean time here is a picture of a 26' we just ran. Glen

Here are a few Pilothouse's we are currently working on.

The one in the foreground is a 29' heading to Alaska. The one accross the aisle is a 29' heading to Oregon and the one to the right is a local 26' version. Glen



This is a 30'er in the paint booth also going to Alaska...



Here is another view of the 26'....

mojomizer wrote:Ooooooohhhhhh I like shiny How about some deck and interior pictures. Please

Here's a deck and interior photo...although, the deck and interior isn't quite completed, as of yet. This 24' is going to California and it's currently being rigged. Glen

The 24' is awesome. Looks to have a stand up-head. A must for the next boat. Does it have self bailing decks? I see the full extended transom. Good looking boat!

PropNut wrote:The 24' is awesome. Looks to have a stand up-head. A must for the next boat. Does it have self bailing decks? I see the full extended transom. Good looking boat!

Yes, this 24' Pilot has a stand-up head. This boat is being custom built for a customer in California. He didn't want a 26', but wanted a head, so we stretched the 23' to a 24'. He also wanted self bailing. In order to make this shorter boat self bailing (It's harder to make a smaller boat self bailing.), we added the pod under the twin motors and raised the floor a little more than the floors in a 26'. Glen

So is the pod included in the 24'LOA or is added. I ask as my 185 is 18'6" and with the motor extension my hull is actually 20'...makes for better performance and sits better at rest! Just curious!