Re: Albacore Tuna tackle
Posted: Sun Oct 28, 2012 6:31 pm
I thought we should bring this one back to life. After being out 3 times in my own boat this year I think I have a basic spread down.
First we deploy the Yo Zuro Dabo pins (the big orange thingy's). They sit about 25 feet back just inside of the rear cleats.
Secondly we set out the handlines. They are 35 feet back right off the rear cleats which puts the lures in the thin clear patch between the prop wash and the wake. We did try some Yo-zuri K type diving boards for a little bit on one trip but no luck on them yet.
Thirdly we put out the two longer rod lines in the first set of rod holders closest to the stern. They are set back around 60 feet and have small Yo-zuri trolling rabbits 8' in front of the lure.
Fourth and final we set out two more rod lines in the next set of rod holders with spash boats attached 8' in front of the lure.
These slash boats or Hokuriku style boards are homemade copies of the Yo Zuri product you can buy. We call them PMO's (poor man's outriggers). They will get your lure 20' out to the side and we run them a little closer in like 45' back or riding the 3rd or 4th wake. I really like these units and they work. The one trip where we caught 18 fish, the starboard PMO rod caught 8 fish!!!
http://www.englundmarine.com/products_s ... lies.shtml
I guess the way we have started to do this is start in the prop wash and frame around it. Seems to work good and is easy to deploy the gear quickly this way.
I read the infamous Franko method and it seemed to work for us. We did not have a lone buffalo or whiskey rod out the back and we ran all the same colored lures on every line. 2 of the trips involved lot's of doubles and a couple of triples.
First we deploy the Yo Zuro Dabo pins (the big orange thingy's). They sit about 25 feet back just inside of the rear cleats.
Secondly we set out the handlines. They are 35 feet back right off the rear cleats which puts the lures in the thin clear patch between the prop wash and the wake. We did try some Yo-zuri K type diving boards for a little bit on one trip but no luck on them yet.
Thirdly we put out the two longer rod lines in the first set of rod holders closest to the stern. They are set back around 60 feet and have small Yo-zuri trolling rabbits 8' in front of the lure.
Fourth and final we set out two more rod lines in the next set of rod holders with spash boats attached 8' in front of the lure.
These slash boats or Hokuriku style boards are homemade copies of the Yo Zuri product you can buy. We call them PMO's (poor man's outriggers). They will get your lure 20' out to the side and we run them a little closer in like 45' back or riding the 3rd or 4th wake. I really like these units and they work. The one trip where we caught 18 fish, the starboard PMO rod caught 8 fish!!!
http://www.englundmarine.com/products_s ... lies.shtml
I guess the way we have started to do this is start in the prop wash and frame around it. Seems to work good and is easy to deploy the gear quickly this way.
I read the infamous Franko method and it seemed to work for us. We did not have a lone buffalo or whiskey rod out the back and we ran all the same colored lures on every line. 2 of the trips involved lot's of doubles and a couple of triples.