replacing springs, and flipping the axle
replacing springs, and flipping the axle
It's that time to replace my trailer leaf springs. I need a second opinion. I would like to locate the axle to the top of the springs. Right now the 2x3 axle is about 6 inches to the bottom of the frame, with the axle being 3" high. I believe I would have to turn the axle so the 2" side was the height. I believe this would leave me about 3 to 3.5 inches to the bottom of the frame. I need to lower my boat as it was always hard to launch and retrieve. Plus I bought a new trailering vehicle.
- Gypseas
- Donator 14, 15
- Posts: 154
- Joined: Sat Oct 22, 2011 12:23 am
- 12
- Your location: Victoria, BC
- Contact:
Re: replacing springs, and flipping the axle
I would come up with some kinda rod contraption on the axle pointing up and resting against the side of the frame. Then fit the rod with something that would slide up and down on it but have enough friction to only be pushed down closer to the axle by the frame. Drive around following your usual trip path and see how much of a deflection you are going to need.
Pics are worth 1000 words but I don't have one ...
cheers
Pics are worth 1000 words but I don't have one ...
cheers
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: replacing springs, and flipping the axle
Would a drop axle work better, look here>>>> http://www.trailerpart.com/52kdroptraileraxle.htm
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
Re: replacing springs, and flipping the axle
So finally getting around to replacing the springs. After looking at everything, I noticed that it appears the axle had a one inch half square stock tack welded to the 2x2 axle. Making the axle a 2x3, maybe to strengthen the axle up, who knows why. I've always knew my trailer was really high, 24 inches to the bottom of the coupling, kinda too high even with my truck. I'm at the point I'm going to cut part of the extra inch off the axle near the u bolts only allowing me to place the axle on top of the springs and lower my trailer. Any food for thoughts?
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: replacing springs, and flipping the axle
I have 3 Dexter 3500 lb Torsion Bar axles in the yard. Too bad ya don't live closer. Gypsea has a good Idea to see how much movement is at your springs and frame. A rubber dohiki between the frame and the axle might cushion the bumps a little.
A torsion Axle bolts right to the frame and then you can lower it 4 to 6 inches depending. Dexter will make you any size 3500lb axle you want for around $350 SixRobblees or similar trailer supplier can order it. I had to replace my 3500lb with 6000lb ones.
A torsion Axle bolts right to the frame and then you can lower it 4 to 6 inches depending. Dexter will make you any size 3500lb axle you want for around $350 SixRobblees or similar trailer supplier can order it. I had to replace my 3500lb with 6000lb ones.
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate