Anchors
-
- Donator ,15
- Posts: 491
- Joined: Sat Aug 02, 2008 8:14 am
- 15
- Your location: Holbrook, NY
- Location: Holbrook,NY
- Contact:
Re: Anchors
Your getting an aluminum boat, it should have an aluminum anchor. Fortress anchors have never let me down. We supply them with our new boats. Your mate will appreciate it.
Welderbob
Welderbob
-
- donator 15,17
- Posts: 22
- Joined: Tue Jan 28, 2014 11:03 am
- 10
- Your location: New Hampshire
- Location: NH & CT
Re: Anchors
Thanks guys
-
- Posts: 47
- Joined: Mon Jan 14, 2008 12:40 pm
- 16
- Your location: Casco Bay, Maine
- Location: Casco Bay, Maine
Re: Anchors
I use a 14 lb. Delta (plow) anchor. I originally had a 13 lb. West Marine "danforth style" anchor, which I still use as a stern anchor when I beach the boat. We have too much ledge/cobble/grass for the danforth to set properly and quickly. The plow sets the first time almost every time. There's lots of information available, and the "best" anchor for you depends upon: 1) your boat; 2) the composition of the bottom where you anchor; 3) how you plan to anchor (lunch hook, occasional overnight, live aboard, etc.); and 4) how much chain rode you'll carry. All anchors work better with more chain. Peezers comments are right on regarding anchor use.
-
- Doator '08, '09, '10, '11, '12, '13, '14, '15, '16, '17
- Posts: 177
- Joined: Tue Mar 24, 2009 7:12 pm
- 15
- Your location: Gulfport, Fl
Re: Anchors
Fortress works for me!welderbob wrote:Your getting an aluminum boat, it should have an aluminum anchor. Fortress anchors have never let me down. We supply them with our new boats. Your mate will appreciate it.
Welderbob
"It was the Law of the Sea, they said. Civilization ends at the waterline.
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
Beyond that, we all enter the food chain, and not always right at the top."
Hunter S. Thompson
-
- Posts: 50
- Joined: Fri Dec 17, 2010 2:30 pm
- 13
- Your location: Northern NY
Re: Anchors
Why? Will the chain be aluminum, too?welderbob wrote:Your getting an aluminum boat, it should have an aluminum anchor.
Welderbob
-
- Donator ,15
- Posts: 491
- Joined: Sat Aug 02, 2008 8:14 am
- 15
- Your location: Holbrook, NY
- Location: Holbrook,NY
- Contact:
Re: Anchors
No the chain wouldn't be aluminum, but a nice length of vinyl chain works well.
Welderbob
Welderbob
-
- Posts: 50
- Joined: Fri Dec 17, 2010 2:30 pm
- 13
- Your location: Northern NY
Re: Anchors
Question un-answered: is there a galvanic corrosion problem using a galvanized anchor with a welded
alloy boat, or, is it just your preference?
Another off-beat question: are sacrificial anodes ever attached to anchors of any type?
Like an aluminum anode on a galvanized anchor/chain to extend their lives?
I've never seen it done, but it would seem logical, especially where the anchor/chain is continually
on view on a pulpit where rust is ugly.
My experience with vinyl-coated steel chain has been disappointing...
alloy boat, or, is it just your preference?
Another off-beat question: are sacrificial anodes ever attached to anchors of any type?
Like an aluminum anode on a galvanized anchor/chain to extend their lives?
I've never seen it done, but it would seem logical, especially where the anchor/chain is continually
on view on a pulpit where rust is ugly.
My experience with vinyl-coated steel chain has been disappointing...
-
- Contributor
- Posts: 513
- Joined: Thu Feb 21, 2008 7:13 pm
- 16
- Your location: Louisiana
- Location: Greenwell Springs, LA
Re: Anchors
I use stainless steel anchor chains and shackles on my boats........... No rust problems other than it is pricey.Karl in NY wrote:
I've never seen it done, but it would seem logical, especially where the anchor/chain is continually
on view on a pulpit where rust is ugly.
My experience with vinyl-coated steel chain has been disappointing...
-
- Donator ,15
- Posts: 491
- Joined: Sat Aug 02, 2008 8:14 am
- 15
- Your location: Holbrook, NY
- Location: Holbrook,NY
- Contact:
Re: Anchors
Aluminum anchors are a preference. The vinyl coats chain lasts a few years. I use stainless hardware when possible.
I don't think a zinc would solve any problems.
First the anchor isn't in the water that long. Its a small mass a number of feet away from the boat. The bottom of the boat should be barrier coated so there is little electric difference going back and forth. The anchor is generally connected with a non conductive line.
I don't think a zinc would solve any problems.
First the anchor isn't in the water that long. Its a small mass a number of feet away from the boat. The bottom of the boat should be barrier coated so there is little electric difference going back and forth. The anchor is generally connected with a non conductive line.