26' Pacific Fishing Machine SOLD
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
26' Pacific Fishing Machine SOLD
All Reasonable Offers Considered!
Damn! I have to drop it again! I know things are tough, but at this price a buyer can do a little conversion to suit his needs.
The Ultimate Fishing Boat
23 Pics at this site
gallery/album.php?album_id=25
This loaded 26ft Pacific will do you well.
The 300 HP Supercharged Mercury has about 360 hours on it and has a transferable warranty good through December, 2013
Mercury 9.9 Pro Kicker has power tilt, start and is operated from the console. Also has back up pull start as well. Prop Guard to.
All maintenance records available from dealer.
Mercury SS prop and spare factory aluminum prop
Electric shift, throttle, Power steering and Smart Craft package,
Power Lewmar Pro-Fish 1000 windless (free fall and power in or power down and up settings.) 250ft rode and 30ft chain drops into self-draining rode locker.
150 Gallon baffled aluminum fuel tank.
The bottom is 1/4" and the rest of the vessel is 3/16ths. Bow deck and offshore bracket is 1/2" plate.
1 1/4” Welded Exterior Rails and 2 ½ welded interior rails.
Padded Rod lockers hold 12+ foot rods. Both doors open into a long easy access area.
Walk through transom,
2 additional self-bailing scuppers and 3500 pounds rated injected flotation
3/4 Fisherman's Top, made from Top Gun material and all Stainless Steel bows and hardware.
Two hardwired TR-1 Autopilot controls. Bow and Stern locations.
Ray Marine A60 Chart plotter, GPS with 500w sounder.
Lenco Trim Tabs
2 wash down stations
Hot & cold running water at sink.
4 Seats on raised boxes and 2 identical seats on pedestals
Large ½” thick UHMW fish cleaning table.
Catalina SS Barb-B-Q with flush mounts on bow and service tray. (Unit barely used)
12 Scotty rod mounts and 6 moveable Scotty rod holders
8500 pound Galvanized Tricker Trailer 4 wheel vented, E-coated disc breaks with electric over 1600psi hydraulic actuator.
2 5/16” hitch
LED lights all around, good tires, new spare and galvanized wheels.
New brakes and hubs serviced two weeks ago 11/06/2010
Over $80,000 invested, Asking $54,900 OBO OBO Financing Available
Pete Grace
Home 360-225-1392, Cell 360-513-5256
click HERE for pics
Damn! I have to drop it again! I know things are tough, but at this price a buyer can do a little conversion to suit his needs.
The Ultimate Fishing Boat
23 Pics at this site
gallery/album.php?album_id=25
This loaded 26ft Pacific will do you well.
The 300 HP Supercharged Mercury has about 360 hours on it and has a transferable warranty good through December, 2013
Mercury 9.9 Pro Kicker has power tilt, start and is operated from the console. Also has back up pull start as well. Prop Guard to.
All maintenance records available from dealer.
Mercury SS prop and spare factory aluminum prop
Electric shift, throttle, Power steering and Smart Craft package,
Power Lewmar Pro-Fish 1000 windless (free fall and power in or power down and up settings.) 250ft rode and 30ft chain drops into self-draining rode locker.
150 Gallon baffled aluminum fuel tank.
The bottom is 1/4" and the rest of the vessel is 3/16ths. Bow deck and offshore bracket is 1/2" plate.
1 1/4” Welded Exterior Rails and 2 ½ welded interior rails.
Padded Rod lockers hold 12+ foot rods. Both doors open into a long easy access area.
Walk through transom,
2 additional self-bailing scuppers and 3500 pounds rated injected flotation
3/4 Fisherman's Top, made from Top Gun material and all Stainless Steel bows and hardware.
Two hardwired TR-1 Autopilot controls. Bow and Stern locations.
Ray Marine A60 Chart plotter, GPS with 500w sounder.
Lenco Trim Tabs
2 wash down stations
Hot & cold running water at sink.
4 Seats on raised boxes and 2 identical seats on pedestals
Large ½” thick UHMW fish cleaning table.
Catalina SS Barb-B-Q with flush mounts on bow and service tray. (Unit barely used)
12 Scotty rod mounts and 6 moveable Scotty rod holders
8500 pound Galvanized Tricker Trailer 4 wheel vented, E-coated disc breaks with electric over 1600psi hydraulic actuator.
2 5/16” hitch
LED lights all around, good tires, new spare and galvanized wheels.
New brakes and hubs serviced two weeks ago 11/06/2010
Over $80,000 invested, Asking $54,900 OBO OBO Financing Available
Pete Grace
Home 360-225-1392, Cell 360-513-5256
click HERE for pics
Last edited by Seefood Man on Wed Jan 18, 2012 5:04 pm, edited 5 times in total.
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Re: 26' Pacific Fishing Machine!
Open to offers and suggestions.
- waterdog247
- Donator '10, '12, '13
- Posts: 219
- Joined: Sat Aug 21, 2010 2:53 am
- 13
- Your location: Southern Philippines
Re: 26' Pacific Fishing Machine!
That is a good looking rig sir! you should have no trouble with someone taking it off your hands!
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Re: 26' Pacific Fishing Machine!/Financing AvailablePRICE CH
Have to bump for a price change.
Well got to do something, She got to go!!!!!!
Well got to do something, She got to go!!!!!!
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Has to go boys!
NEW PRICE 54,900 OBO
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Re: 26' Pacific Fishing Machine PRICE DROPPED AGAIN
Have to bump it again. Open to offers folks
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: 26' Pacific Fishing Machine PRICE DROPPED AGAIN
Pete, if I hang around long enough that boat may become so affordable I could have two of them.
I'd hang tough. My dad always tell me "ya can give a chicken away cheap, or a goat, but never the FARM". That's why I'm not the cheapest fishing guide in the area. But still at it, going on my 16th year in a row.
how's the bizness up yonder been?
I'd hang tough. My dad always tell me "ya can give a chicken away cheap, or a goat, but never the FARM". That's why I'm not the cheapest fishing guide in the area. But still at it, going on my 16th year in a row.
how's the bizness up yonder been?
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Re: 26' Pacific Fishing Machine PRICE DROPPED AGAIN
Thanks Dave!
The first part of this year has been tough. Had to have surgery on my left foot. Getting better, but it's been a bear to get around. Just tired of hurting .
On the other side, the Columbia is above flood stage. Fish can be caught, but I just can't justify in bring clients out for just a fish or two, even at that. Yes, I really need the work, but I won't to that to people.
This winter has not helped either. Yesterday was our first day at 80 degrees and it's going back down to the 60s come Monday. We have been very seriously considering moving to Fl. Even though the summer is a rough one with the humidity, I think it easier to bear then the six to eight months of rain we have had. Even the "native" folks here are getting cranky.
Hope things have been good for you?
Yak at you later
Pete
The first part of this year has been tough. Had to have surgery on my left foot. Getting better, but it's been a bear to get around. Just tired of hurting .
On the other side, the Columbia is above flood stage. Fish can be caught, but I just can't justify in bring clients out for just a fish or two, even at that. Yes, I really need the work, but I won't to that to people.
This winter has not helped either. Yesterday was our first day at 80 degrees and it's going back down to the 60s come Monday. We have been very seriously considering moving to Fl. Even though the summer is a rough one with the humidity, I think it easier to bear then the six to eight months of rain we have had. Even the "native" folks here are getting cranky.
Hope things have been good for you?
Yak at you later
Pete
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: 26' Pacific Fishing Machine PRICE DROPPED AGAIN
I HAVE A DECENT HOUSE DETACHED 2 CAR GARAGE ON PRIVATE STREET, AND IT COMES WITH A BOAT PORT FOR YOUR 26 PACIFIC. VERY NEAR BEACH LIVING WITHOUT PAYING BEACH PRICES.
AND YA DON'T NEED TO SPEAK SPANISH HERE......JUST REDNECK AND EBONICS. SO BRUSH UP ON IT.
AND YA DON'T NEED TO SPEAK SPANISH HERE......JUST REDNECK AND EBONICS. SO BRUSH UP ON IT.
-
- Sponsor
- Posts: 119
- Joined: Tue Aug 26, 2008 10:01 am
- 15
- Your location: Woodland, WA
- Location: Woodland WA
- Contact:
Re: 26' Pacific Fishing Machine SOLD!
Well guys it's SOLD! Deal closed on the 10th and now it is up in Sitka Ak. A nice couple, originally from Georgia, bought it.
The drive way looks barren now
Well had to what I had to do.
I'm thinking, very seriously, about moving to the Keys. Thinking Islamorada.
The drive way looks barren now
Well had to what I had to do.
I'm thinking, very seriously, about moving to the Keys. Thinking Islamorada.
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: 26' Pacific Fishing Machine SOLD
I believe ya said you were originally from NY?
Then, you'd fit right on in Pete!
Talk about "expensive"....I believe card board boxes are going for $200,000 if anywhere near water. Even mud puddles.
No boat, so now what ya gonna do. Heck there's always "disabilility". I'd like to try myself, I have the "disability" to make any money here in freak-ville, florida
Then, you'd fit right on in Pete!
Talk about "expensive"....I believe card board boxes are going for $200,000 if anywhere near water. Even mud puddles.
No boat, so now what ya gonna do. Heck there's always "disabilility". I'd like to try myself, I have the "disability" to make any money here in freak-ville, florida
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: 26' Pacific Fishing Machine SOLD
Pete, just because she's gone doesn't mean you have to leave , we still want your input on things .
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386