Aluminum Mount
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Aluminum Mount
At the Seattle Boat Show I found a product that was shown by one of the vendors. I have been searching for one of these for a while. it is aluminum and can be welded to the boat instead of bolting it in. Once the mounts are installed the inserts are mounted on your different components Either straight or bent to a 90 deg. What do you think of it?
http://www.v-lock.com/v-lock-overview.php
http://www.v-lock.com/v-lock-overview.php
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Aluminum Mount
I have heard they work very well but I would bolt it in before I welded it in.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: Aluminum Mount
Why? Welding them Might cause cracking?
Boltin them has the added SS fasteners and the holes that could induce corrosion.
Does anyone make them in marine plastic?
Boltin them has the added SS fasteners and the holes that could induce corrosion.
Does anyone make them in marine plastic?
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Aluminum Mount
Just for the fact you may not want them where they were welded in and I want to say the 1st ones were made out of plastic.
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
- JETTYWOLF
- Contributor/donator/Location Nazi
- Posts: 6074
- Joined: Sun Jan 06, 2008 9:11 pm
- 16
- Your location: JACKSONVILLE FL USA
- Location: Tree-hugger, USA...they call it FLA.
Re: Aluminum Mount
FINALLY!!!!!!!
A product listed here that looks to be worth a damn. I like that. Looks EZ to install and right now I can see many applications on my boat already.
Pricey, but HD metal is usually worth it.
Why ain't our "fabricator members" coming up with stuff like this?
I see possibly a way of using that to mount a Dennis Braid Chum mate...aka: An Aussie Burley Bucket. That's removeable!!! In a Jiffy!
Some one here ought to also start making "Aussie" style cutting boards for our boats, possibly utilizing a mount system like this or weld on. With rod holders, and drain tubes, knife holders etc. I'd be in the market, if it was innovative as some opf the stuff I see on them slick azz boats fown yonder.
A product listed here that looks to be worth a damn. I like that. Looks EZ to install and right now I can see many applications on my boat already.
Pricey, but HD metal is usually worth it.
Why ain't our "fabricator members" coming up with stuff like this?
I see possibly a way of using that to mount a Dennis Braid Chum mate...aka: An Aussie Burley Bucket. That's removeable!!! In a Jiffy!
Some one here ought to also start making "Aussie" style cutting boards for our boats, possibly utilizing a mount system like this or weld on. With rod holders, and drain tubes, knife holders etc. I'd be in the market, if it was innovative as some opf the stuff I see on them slick azz boats fown yonder.
Re: Aluminum Mount
Hello, Mike here, inventor of the V-Lock.
Whenever a new forum starts talking about the V-Lock I give a 10% discount to members.
Just enter AluminumAlloyBoats at checkout to get the discount.
This discount will be good until March 1st 2011.
I have a new version coming out next month made of Starboard and a starboard flat insert.
The aluminum inserts are also comapible with the starboard version.
http://www.v-lock.com/images/starboard_all_breakout.jpg
I appreciate any feedback, comments, or suggestions for uses of the V-Lock.
Mike
V-Lock
Whenever a new forum starts talking about the V-Lock I give a 10% discount to members.
Just enter AluminumAlloyBoats at checkout to get the discount.
This discount will be good until March 1st 2011.
I have a new version coming out next month made of Starboard and a starboard flat insert.
The aluminum inserts are also comapible with the starboard version.
http://www.v-lock.com/images/starboard_all_breakout.jpg
I appreciate any feedback, comments, or suggestions for uses of the V-Lock.
Mike
V-Lock
- welder
- Site Admin
- Posts: 4671
- Joined: Thu Jan 03, 2008 11:51 pm
- 16
- Location: Whitesboro, Texas
- Contact:
Re: Aluminum Mount
Mike do you have any pictures of the V-Lock in use ?
Pictures 800X600 load very well here
Pictures 800X600 load very well here
Lester,
PacificV2325, Honda BF225
2386
PacificV2325, Honda BF225
2386
Re: Aluminum Mount
welder, there are a bunch of pictures sent in by V-Lock customers here: http://www.v-lock.com/applications.php
Mike
V-Lock
Mike
V-Lock
- goatram
- Donator 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19
- Posts: 1959
- Joined: Wed Apr 09, 2008 11:53 pm
- 16
- Your location: Stanwood, Wa
- Location: Stanwood WA
Re: Aluminum Mount
Good on ya Mike for paying attention and looking out for your product!
John Risser aka goatram
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
33' RBW with twin 250 Hondas (Aliens)
2015 Ford F350 Dually
Master of R&D aka Ripoff and Duplicate
Re: Aluminum Mount
Here on the forum and at boat shows people have asked many times about getting a V-Lock in plastic. Well I finally got it worked out and not just plastic but marine grade starboard.
There is a flat starboard insert but the aluminum inserts are 100% compatible.
Let me know what you think.
Mike
http://www.v-lock.com
There is a flat starboard insert but the aluminum inserts are 100% compatible.
Let me know what you think.
Mike
http://www.v-lock.com