1998 Valco Bayrunner leaning pad removal

General boating discussion
Ltpeaches
Posts: 1
Joined: Thu May 05, 2016 12:06 pm
7

1998 Valco Bayrunner leaning pad removal

#1

Post by Ltpeaches »

I am in need of replacing my, I'll call it a leaning pad, on my Bayrunner Baja. This pad is attached to the live well. I have looked for a way to remove it so I may get upholstered. As far as I can tell, the foam is glued to plywood, and the plywood is attached (somehow) to a piece of angle iron, which is attached (somehow) to the live well. I have spent a good amount of time looking for a way to remove it. There are no obvious bolts/screws that I see to undo it. Does anyone have previous experience with removing one of these? Thanks
IMG_0096.JPG
RCSO
Posts: 16
Joined: Mon Mar 06, 2017 3:37 pm
7

Re: 1998 Valco Bayrunner leaning pad removal

#2

Post by RCSO »

They were built as a single unit. Take the canvas and foam off and you will find the screws.
Post Reply Previous topicNext topic