PXL_20210521_191902740.jpg Good afternoon from Virginia. I was given a 14ft Lowe Roughneck Jon boat by a friend. It sat down on the edge of the water...
Last post
ARERHODES,
in this category on threads listed below of similar subject are very detailed methods and discussions of your boat's problems and...
What do all you guys use to clean the bilge out? All suggestions welcomed.
Last post
Pour some salt away in the bilge then add water. Keep the drain plug in and drive the boat around. Find a hill and go up that. Get the water to move...
Hello, I just purchased my first boat...an 2002 Smokercraft Alaskan. The boat has been under covers the last 5 years. Used previously in salt water....
Last post
littlefengers,
glad to hear your knife didn't just push through corrosion spots! Might try to find some way to leave the boat up on a set of blocks...
Hi all! Cool site and I am surprised I didn't join sooner! I've owned my Bayrunner since 2014 and its served me well for what she is.
I've got a 19'...
Last post
Assuming this thing currently has a prop. What are you looking for or looking to change? Some prop manufacturers have calculators if you have a bunch...
I have a 2yr old 26ft Pacific with a rub rail running the entire length of the boat. The boat is on a mooring 6mts of the year in...
Last post
Hi Kevin, my apologies. I was using 'salt' too liberally. I fully agree that the pitting has been caused by standing/stale water trapped between the...
Hey AAB, new to this forum and alloy boats. I recently picked up a 1997 Alumaweld Stryker. Unfortunately, it has sat outside for over 2 years here in...
Last post
Ryan, here's a link to what I was talking about:
not this brand necessarily but the type of adhesive film involved. Bedding this to alum. sticky...
My boat was beaten up over the winter by loose tarp and was scuffed up as you can see. Looks better after washing down. I am considering refinishing...
Last post
To be honest I have not been too impressed with the nyalic type finish. It is fairly durable but over time is prone to scuffing if you tie up to...
Howdy team,
What are your thoughts on the Aleutian from Silverback?
Last post
Looks a lot like the Coldwater Boats hull form. I own a 30' charter boat here in Alaska, and would say 24.5* deadrise is overkill. 18* is plenty in a...
Hi all... Unfortunately, I am here because I have some kind of corrosion going on with a boat I recently purchased. First.. I need instruction with...
Last post
Tom, while i can say it is never acceptable to have loose steel/iron/ferrous metals in the (wet) bilge of an aluminum boat.... I don't think this is...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum