I'd like to install a couple of scuppers on my new Raider, but if I measure it correctly it is very close or at the resting waterline. Has anyone got...
Added a matching Tempress hatch on aft bulkhead to allow access to the wash down pump and filter and fuel filter with an added benefit additional...
Last post
Now i see what you are saying...I went and had a look...with the way mine is set up I could drop a safety bolt down between the two white spacers and...
I have established a charging station for the HHVHF units..one for the boat as a back up to the installed unit and one for the camper for who ever is...
I have my eye on a used 22' aluminum , it has an extended height cabin ---makes it look like a english tour bus -- i would like to modify and make a...
Last post
Thanks for the reply Chaps. Just found out it,s a 20 yr old Argo with a pro install of engine pod 8 years ago
I will have to take a closer look at...
As Tincan was saying in an older post there really aren't very many options when choosing a thru hull transducer for a plate alloy hull. I needed to...
I think I've found the answer to achieving more robust filtration/water separation than what can be typically bought for small gasoline boats at the...
Here is my first sketch, based on a Boden Albatross MkII. I raised the sheer to give a more soft profile.
Measurements: 5,2*2,2 meters
Hull...
Last post
Hi zumpen,
I have TIG & MIG welded as a hobby for years. TIG welding is a lot of fun and can produce very high quality welds. When my son and I built...
Here are some details of the gas tanks on our daughter's skiff. Both tanks are forward the console and outboard laying to the topsides under a narrow...
Last post
CTMD,
This extinguisher is on deck to use on the engine and the only soft fuel line in the boat that is aft the transom on the engine mount. This...
A good friend and very innovative fabricator from Oregon, was gearing up to build a series of small welded alloy boats and didn't want to try laying...
Last post
Is there room for a tray of hot coal under the jig? I've never had a spit roasted cow before.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
