AluminumAlloyBoats.com

May I suggest some reading.

Welcome to AAB.
Do you have pictures of the metalboatkits build?
Please post some, thanks.

Update: May have been the wrong anodes and a broken jumper wire.
Sanded, painted, replaced anodes and jumper wire.
Seems to be doing well, I haven't looked at it.

I'd like to see how the exhaust is routed on the inside.

Is it pitted, rough, chalky, flaking metal away?

Scrolling down my Facebook feed and I see an add.
What does Wooldridge think of their welding equipment?
I'm still welding along with my old Miller syncrowave 250 but I am getting an itch for a new inverter machine to tig this anodized aluminum.

The price point alone says no way.

The one picture's gone

What is the stamped number? is it a HIN

This is assuming you have the pix saved to your computer??? Click full editor !aaa.PNG Click attachments !aaaments.PNG Click add files !aaadd.PNG Pick your pix !aaapickphotos.PNG Click Place inline then click preview. Make sure it looks like you expect, if not adjust the code and spacing click previ...

Optomist Fabricator

1/8" wall 1"x2" box tube can be rolled or arched manually. Bump bending between blocks of wood anchored to a stout table or vice. wood shoes in a vice to save scratching the metal. 1st try if you haven't done this before make a template (line on the floor, table or part of the curve i...

Thanks Eastern metal is my regular supplier for anodized material, I try to buy what I can from them. https://www.easternmetal.com/ Alro metals when I need steel, stainless or metals eastern doesn't carry. https://www.alro.com/ Both have minimum orders for one of their trucks to stop by, but both ha...

I'm going to make a flounder gigging pole for my father in law out of aluminum. Almost all of the locals use a wood pole of some sort or a NON ALLOY push pole. It's main use will be for stabbing flat fish in shallow water then lifting up in a fashion to keep them from sliding back off the barbed tri...

And that right there helped marine wiring click in my grey matter. "D) The DC negative Buss is correctly BONDED to the hull in ONE (single) location with a silver clad 'lug' onto a dedicated and sacrificial aluminum lug or padeye, with a bolt; and that location is shielded from being wetted.&qu...

gandrfab wrote: ↑Tue Feb 19, 2019 1:16 pm What does AAB recommend for paint?

Back to the top. This still could still use cleaning and painting.

Helpful, engaging, hurtful, misleading, informative and full of false information. Facebook was originally intended for college students, but today anyone can join the network. Although the site's scope has expanded to include more than just students, its purpose remains the same -- giving people a ...

Remove all combustibles, happily weld clean metal. Possibly fill with argon.

Ventilate, circulate, positive air flow taking any fumes away.

1/4 full fuel tank, pressurize tank wait till you smell fumes and (make yourself right with Jesus) then strike an arc.

Thanks, Some how I missed this "I'd suggest building it as a flat top surfboard" where the deck to keel was done on a rotisserie then the topsides added after the entire below decks is completed and air tested." Before typing everything else. Sound promising to build like that, still ...

Just thinking on line. How about a slight V barge like boat 22' X 8.5' to 9' with enough of a V to give it about a 5" rise from keel to chine. I'm thinking something along the bottom to help keep it from sliding in turns, be it angle or plate fins on the edges? both I don't know. (I do have air...

Welcome back.

Get the 26 now and figure the other details out.

I think he's bluffing.

I understand.
One way can be a great way. And in his postilion it is the only way.

The whole old dog and new tricks comes in to play, "always" never applies to a closed mind. It is what it is.