AluminumAlloyBoats.com

It's aluminum and its not a law enforment boat it's called pacific adventure it looks like he spent 100k in electronics

I saw that boat what a massive looking hull compared to the pilot house

Are your phones capable of downloading the tapatalk app? If so you can upload photos from your phone using it as well

I will I'm going to start a thread I think

After sanding with 400 how does the finish look on it?would you consider leaving it like that or are you going to try and Achieve a mirror finish?did you use a palm sander of just by hand?

I finally understand exactly what I have to do and what I have to use thank you very much I think I'm going to wait a few weeks to a month before I start this because the minimum temperature for the paint and other stuff is 50f or 10c in my case but got lots of other stuff to do on the boat and trai...

The epoxy fairing compound asks for a coat of Pettit Protect 4700/4701 Gray before using it,can i use the barrier coat you recommend under the fairing compound or should I use Pettit Protect 4700/4701 Gray then the fairing compound then the barrier coat you recommended I'm very new to all this looks...

What would you recommend for a barrier coat after using the epoxy fairing compound

Yes the plan is to leave the bottom bare and paint a boot stripe

It's right on the water line about above and below

And no trim tabs on the boat did it need some really badly? I only took it for a few test drives,once in 40 knot winds and it performed like a champ.it bows has a 2006 suzuki 200hp 4stroke on it and the hydraulic seat is still intact. it hasn't been maintained very well over the years so I'm bringin...

Yes it's your old boat! I bought it from the guy in Sidney who used it as a commuter I'm turning it into a fishing machine

What should I use for a epoxy fairing compound and also what should I use for a barrier coat?thanks so much for your help as I am new to this but will learn as I go with a little help.

Most of the pitting is on the side of the boat and a little up front where the red stripe is in the picture

Boat was built on knapp island in 1993 the guys who built the boat are now known as Armstrong boats

ImageUploadedByTapatalk1360897248.542329.jpg ImageUploadedByTapatalk1360897297.769526.jpg Found the pitting after sandblasting the hull.it is located where that old red stripe is painted on the boat before it was sand blasted. It goes all around the boat except in the stern. Maybe the red stripe wa...